www.mikes-models.com blog

My Twitterings

• Will I make a mould for sea fishing weights? A number plate for the bungalow? Sides for cope and drag? cylinder block home design engine?test3 days ago
• Hope to get out to the workshop tomorrow. I am itching to melt some metal and have come up with too many possible projects too choose fromtest3 days ago
• When you think it was ok to throw out that big box your hoover came in, then the thing goes wrong! Machine Mart dealing with it ok so far!test3 days ago
• Out into the workshop this morning and turning metal! Well for a short time (need to see the Grand Prix!)Flywheels are the objects to turntest5 days ago
• Why another bench top? Trying my hand at silver repairs! Yes trying to learn a new skill. Will post picture on http://www.mikes-models.comtest1 week ago
• Dragged myself out into the workshop today...then spent my time tidying up from the last session, before building a portable bench top ...test1 week ago

Recent Posts

• Error on Westbury’s Seal Plans but no problems since it has been found in time
• Success – First melt of Aluminium in Home made furnace!
• Flames in the Furnace! Home made gas fired furnace being built.
• Hand Turned wine bottle stopper
• Gas fired furnace -work resumes at last

Recent Comments

• Mike Freeman on Hand Turned wine bottle stopper
• World Wide Wine on Hand Turned wine bottle stopper
• Dave H. on Flywheel turning hits a problem – 4 jaws to big!
• Mike Freeman on Flywheel turning hits a problem – 4 jaws to big!
• Mike on Flywheel turning hits a problem – 4 jaws to big!

Tags

Items for sale

TRAVELLING STEADY FOR MYFORD LATHE SIMILAR £22.95

BOXFORD MYFORD LATHE LIGHT £26.99

QUICK CHANGE TOOLPOST SYSTEMsuit MYFORD SOUTHBEND £156.89

Myford lathe chuck backplate 125mm threaded 11 8x12 £21.00

Myford lathe gears x 7 £25.00

Myford lathe gears x 10 £35.00

Lathe chucks x 2 Burnerd £60.00

Lathe chuck jaws two sets of 3 £10.00

RDGTOOLS 2MT SOFT END ARBOUR FOR MYFORD LATHES £4.95

Myford ML3 Lathe Fully Tooled £205.00

Drummond lathe on Myford stand £122.00

MYFORD ML8 CARRIAGE £21.00

A profile 1 2 Nut Link belting link belt twistbelt £14.99

A profile 1 2 Link belting Myford lathe Boxford lathe £14.99

MYFORD ML7 LATHE SPINDLE £40.00

Old Letterpress Printing Block coppertop adana £15.00

MYFORD SUPER 7 LATHE SPINDLE £40.00

MYFORD SUPER 7ML7 ML10 LATHE 4 JAW CHUCK £50.00

MYFORD ML7 SUPER 7 LATHE LEADSCREW HANDWHEEL WITH PEG £45.00

MYFORD ML7 LATHE 2 OF 3 £520.00